- New Liebherr LTM 1650-8.1 delivered to ALL Erection & Crane Rental
- First lift took place in Cleveland, Ohio, United States
- The 8 axle crane convinced at first sight
The newly delivered LTM 1650-8.1, called the “Blue Beast” performed its first lift for ALL Erection & Crane Rental. Delivering outstanding performance at the first job site, the equipment specialist from ALL is looking forward to the upcoming jobs with the new 700 t ( 770 US-t) crane.
The “Blue Beast“, an all-terrain crane with the industry’s largest lifting capacity on eight axles, made its debut recently on a project at a Veterans Administration Hospital in Cleveland, Ohio, United States. The newly delivered Liebherr LTM 1650-8.1, dubbed the “Blue Beast” due to its cobalt blue paint job, performed its inaugural lift for ALL Erection & Crane Rental, the flagship branch of the ALL Family of Companies.
Introduced at Bauma, the world’s leading construction machinery trade fair in 2019, the LTM 1650-8.1 is Liebherr’s successor to the LTM 1500-8.1, the best-selling large crane ever. It ups the ante with a 700 t (770 US-t) capacity, exceeding its predecessor’s capacity by between 15 and 50 per cent, depending on the equipment package selected. Units are made-to-order, with ALL placing its order very early enabling delivery in the second quarter of 2021.
Perfect capacity for the job
The job at the VA hospital involved the construction of a mechanical room and lifting six air handler sections. The crane was set up on the street and had to lift over another building to reach the work area. Its capacity was perfect for the job. “Given where we had to set up the crane, higher-capacity machines wouldn’t have fit, and cranes small enough to fit couldn’t lift the necessary weight at that distance,” said Brian Meek, equipment specialist for ALL Crane.
One of the hallmarks of the LTM 1650-8.1’s design is its ability to set up close to buildings and obstructions while safely maintaining its swing, going where possibly no All Terrain crane of its size could ever go before. Besides other features, this is also offered by the VarioBallast® system, which provides high performance with a smaller ballast radius. The ballast radius can be infinitely adjusted between 6,4 and 8,4 m (21 and 27.5 ft) using a simple hydraulic slewing mechanism.
In tight spaces, even with its back literally against a wall, it will still handle significant picks. It gives plant and facility managers a new way of thinking about how they maintain equipment and where they can install bigger pieces of equipment.
The LTM 1650-8.1 also has two telescopic boom lengths 54 or 80 m (177 or 263 ft) with an easy change system, adding great flexibility. The long boom system is available when needed, and the short one reduces transport costs and setup time. The long boom configuration is also ideal for long-reach, up-and-over applications, providing additional luffing jib strength – just like conditions encountered in the inaugural job.
Convincing right from the start
In this instance, 22 m (73 ft) of the main boom included 87 m (287 ft) of luffing jib. It could easily handle the 7 t (17,000-pound) air handler sections, each 9 m (30 ft) long. The operator picked each section from a flatbed parked on the street, lifted and swung over the interceding building, and set each piece atop the target structure behind it.
“This lift is a perfect showcase for the capabilities of the LTM 1650-8.1,” said Meek. “It has the footprint of a 500 t crane and packs the punch of a 700 t crane. I’ve never seen a large crane built this efficiently. Its assembly is much smoother than even a typical 600 t crane, which will save money on set-up for customers in the long run. I’m excited to see what doors this crane will open to new kinds of jobs.”
