Search
Close this search box.

Starlifter CX-3T

The CX-3T crawler crane has proven itself in civil engineering and other industries as an invaluable solution to lifting, in conditions restricted by height and width, or where difficult access defeated other plants.

Compact, rugged and highly manoeuvrable, the versatile CX-3T, with 360-degree slew, rubber tracks and the telescopic boom has been used extensively under and above ground. This light crane is easily portable by air, water, rail and road.

thumbnail of CX-3T_CX-8T_spec_mt_en

Downloads

*Crane Specifications, Load Charts, and Crane Manuals are for reference only. Contact the crane manufacturer for manuals to operate the crane properly.

Related Models

Advertisement

Product Description

Operating Weight

  • Canopy, rubber tracks – 3310kg(7300lbs)
  • Cabin, rubber tracks – 3480kg(7670lbs)

Engines

  • Kubota V1305 water cooled 20kW @ 2500 rpm (26 bhp)

Electrics

  • 12 Volt system

Hydraulic System

  • Pump – Tandem gear type. 29+29 1/min @ 210 bar (7.6+7.6 US galls/min @ 3090 psi)
  • Track Motors – Axial piston motor/gearbox + motion control valve & automatic fail to safe brake
  • Slew Motor – Axial piston motor/gearbox + crossline relief valve
  • Winch Motor – Axial piston motor/gearbox + over-centre valve + automatic fail to safe brake
  • Derrick Ram – 100mm (4″) double-acting, built-in dual over-centre valve
  • Telescoping Ram (2 stage boom) – 60mm (2.5″) double-acting, built-in dual over-centre valves
  • Hydraulic Power Take-Off (PTO) – (Optional) 29 1/m@ 140bar (7.6 US galls/min @ 2060 psi)
  • Filtration – 10 microns absolute return line filter

Controls

  • Proportional double-acting circuits. 2-4 way joystick control for derrick, telescope, winch and slew
  • Hand lever control for tracks
  • Single lever control for dozer. Single lever control for PTO
  • Hand or foot operated engine revolution accelerator

Safety Devices

  • Mechanical boom angle/load indicator
  • Warning alarm for tracking mode
  • Mechanical anti-slew lock
  • Hydraulics cut out lever on operators entry/exit
  • Hydraulic pressure relief valves throughout
  • Automatic Safe Load Indicator or Moment Limiter
  • Over centre valves on winch and boom – derrick and telescope
  • Fail to safe brake on winch, slew and tracks

Sound Levels

  • LWA 99.5 LPA 86

Performance Data – Boom

  • Boom – retracted – 3970m (13′ 0″)
  • Boom – extended – 6055m (19′ 9″)
  • Boom angle – 0-58°
  • Derrick time – 14 seconds (0-58°)
  • Telescoping time – 17 seconds
  • Hoisting speed – 27 metres/minute (88’7″/min)
  • Wire rope – 48mm x Ø10mm
  • Wire rope – 36M drop on single fall
  • Wire rope – 18M drop on 2 falls
  • Wire rope – 12M drop on 3 falls

Machine Overall Dimensions

  • Width 1890mm, Length 4520mm, Height 2310mm
  • Tail Rad. 1400mm, Legs deployed footprint 1890 x 2400mm

Slew

  • Continuous 360° at 1.5 RPM

Gradability

  • 32 degrees – (58%)

Travel Speed

  • 0 – 2.3 k/h (0-1.4mph)

Track Equipment

  • Standard specification is for rubber track with 100mm (4″) pitch
  • Width – 320mm (12.5″)
  • Ground Length – 1650mm (65″)
  • Ground Pressure – (canopy) – 0.31kg/cm2 (4.5lbs/ins2)
  • Ground Pressure – (cabin) – 0.33kg/cm2 (4.7lbs/ins2)

Instruments

  • Warning lights for ignition, engine temp. & oil pressure, hours, machine levelling indicator

Fuel Tank Capacity

  • 75 litres (19.8 US galls) Sight gauge for level check

Hydraulic Reservoir

  • 120 litres (31.7 US galls) Sight gauge for level check

Optional Equipment

  • Hydraulic Power take-off (PTO)
  • Dozer blade
  • All-weather cabin with “up & over” opening front screen, polycarbonate roof light, tinted glass, screen wiper/wash, heater/blower
  • Air-conditioned cabin
  • Steel track undercarriage – double bar grouser 300mm (12″) wide, 100mm (4″) pitch
  • Automatic Safe Load Indicator or moment Limiter
  • Dual fail to safe brake winch
  • Overhoist limiter – anti-two (block to block type)
  • Fly Jib – 2.4m (7′ 10″)

Reviews

Products You Might Be Interested