Fuwa FWT100

Telescopic Crawler Crane

The Fuwa FWT100 is a telescopic crawler crane with a maximum lifting capacity of 100 tons. The crane’s main boom extends from 13.2 to 50 meters and is complemented by a jib that can reach from 7/12/18 meters, providing versatility for various lifting operations. With a boom derrick angle of -2 to 80 degrees and an angle between the jib and main boom of 0/15/30 degrees, the crane offers flexibility in load placement.

Downloads

*Crane Specifications, Load Charts, and Crane Manuals are for reference only. Contact the crane manufacturer for manuals to operate the crane properly.

Related Models

Product Description

For efficient operation, the crane features a rope with a diameter of 22 mm and a length that allows for significant lifting heights and depths, with a rope speed of 0 to 110 meters per minute and a swing speed of 0 to 1.8 rpm. The travel speed of the crane can vary from 0 to 0.85 km/h, with an increased speed of 1.68 km/h possible, making repositioning on job sites swift and efficient.

With a rated single line pull of 8 t (81.5 kN), the FWT100 is capable of handling heavy loads with precision. The crane’s design ensures a 30% gradeability when the boom is retracted and the cabin is at the rear, allowing for maneuverability on steep inclines.

The crane itself has a mass of 110 tons and overall dimensions of 15200 x 3500 x 3100 mm, making it substantial yet compact enough for various job sites. Its ground bearing pressure is a low 0.06 MPa, which helps to distribute the weight effectively and minimizes the impact on the surface below. This combination of features in the Fuwa FWT100 makes it an effective choice for a wide range of lifting tasks in construction and other industries.