Liebherr LTM1160-5.2

Liebherr has introduced Liebherr LTM1160-5.2 during Las Vegas CONEXPO in March 2014, which was also the first time that the mobile crane has been presented to the world market. The mobile crane has undergone major changeover from its predecessor, Liebherr LTM1160-5.1.

Additional Information

Downloads

Crane Specifications, Load Charts, and Crane Manuals are for reference only. Contact the crane manufacturer for manuals to operate the crane properly.

thumbnail of LTM1160-5.2_spec_mt_en_v2015
Metric, EN
thumbnail of LTM1160-5.2_spec_lb_en_v2015
Imperial, EN

Product Description

The 160 tonnes mobile crane features the new single-engine concept with a mechanical shaft powering the superstructure. It was also the second crane to have this new innovation apart from LTM1300-6.2 which was introduced to the market in Germany BAUMA 2013.

The six-section telescopic boom comes with Liebherr TELEMATIK telescoping system and with its 10.8 to 19 metres folding jib and additional telescopic boom extensions, the new LTM1160-5.2 can reach a lifting height of up to 99 metres and outreach radius of 78 metres. The folding jib can be installed with 0°, 20° or 40° and an optional hydraulic adjustment function is also available for the folding jib. For two-hook operation, a second hoist gear and a 2.9 metres assembly jib and a rooster sheave are available.

Although the telescopic boom remains the same length at 62 metres, the new model boasts an increase of load capacity of an estimated 20-25% from its predecessor. In addition, the width of the carrier has been reduced to 2.75 metres from its previous 3 metres, which means that it is not only easier to travel on public roads but also better working conditions on constricted sites.

READ MORE:  Tadano ATF220G-5

ECO Mode For Better Efficiency

An add-on program has also been developed for the new crane drive concept with just one engine and a mechanical shaft to allow the machine to run with ultra-low fuel consumption. This enables the complete pump drive to be disconnected automatically when the engine is idling and then reconnected by intelligent controllers when required in just matters of seconds.

Another special mode for the mobile crane was the load-sensing range to reduce the cost of crane use while also reducing noise emissions.

Reviews

There are no reviews yet.

Be the first to review “Liebherr LTM1160-5.2”